Amana Tool 54222 Carbide Tipped Classical Architectural Molding 1/8 x 3/32 x 1/4 x 7/16 Radius x 1-3/8 Dia x 1-5/8 x 1/2 Inch Shank blades the template is on top

the template is on top

Technical features such as the sanding pad brake and Vibration-stop balancing put the ETS 125 in a category of its own

Chamfer or bevel edges for decorative effect or to form edge miter joints

This dovetail bit has a shank-mounted ball bearing guide for routing dovetail slots following a template and pattern routing

mount one cutter between the two bearings (as in drawing B)

Amana Tool 54222 Carbide Tipped Classical Architectural Molding 1/8 x 3/32 x 1/4 x 7/16 Radius x 1-3/8 Dia x 1-5/8 x 1/2 Inch Shank blades the template is on topThese bits are designed for routing architectural and furniture moldings and trim. Almost all have the profile laid out vertically, reducing the diameter of the bit. These bits should be used in a 2+ horsepower, table mounted router, and many should be run at reduced speed. Although most have ball bearing guides, guiding the cuts with the fence is recommended.